License Plate Screw Size
License plates are secured in place by small screws. They can wear out, rust, or go missing over time and must be
replaced.
The most common license plate screw size used in vehicles with plastic retainers is 1/4" - 14 x 3/4" inch, while
those with a metal retainer require a specific size and type to avoid damaging the retainer.
Below, in this article, we will give you the license plate screw sizes of a wide range of manufacturers, including
Acura, BMW, Chevrolet, Dodge, Ford, GMC, Honda, Kia, Hyundai, Toyota, and Nissan vehicles, among many others.
Rusty License Plate Screw
License Plate Screw Size Explanation
The first ¼ fraction represents the screw's threaded diameter in inches, the middle number 14 represents the number
of threads on the screw, and the ¾ fraction represents the screw's length in inches.
Screw Size Explanation
License Plate Screw Type Explanation
The head of the license plate screw will usually receive one of the most common driver types, such as flathead,
phillips, or robertson screwdriver.
Most vehicles use a plastic or nylon receiver or retainer that allows for a "universal sized" screw. Still, some
vehicles use threaded metal holes that need the exact-sized screws. The advantage of the retainers is that they can be
replaced if they get damaged.
License Plate Screw And Nylon Retainer
If the vehicle has metal threaded holes, the same size screw will have to be used for that make and model.
In this case, it may be best to purchase the screws at your vehicle's dealership.
They will still be relatively inexpensive at the dealership, and you can be sure to get the proper size.
License Plate Screw Sizes By Manufacturer
Most common license plate screw size by make and model.
| Screw Type |
Make |
License Plate Screw Size |
| - |
Acura |
M6 - 1 x 20mm |
| Slotted Hex Washer Head |
Audi |
M6 - 1.0 x 8mm - 16mm |
| Phillips Truss Head |
BMW |
M5 x 0.8 x 8 - 16mm |
| Slotted Truss Head |
Chevrolet |
#14 x 3/4″ |
| - |
Chrysler |
#12 |
| Slotted Truss |
Ford |
1/4”- 20 x 5/8” |
| Slotted Hex Washer Head |
Ford F-150 |
1/4″ - 14 x 5/8” |
| - |
General Motors |
1/4″ - 14 x 3/4″ |
| Phillips Pan Head |
Honda |
M6 x 1.0 x 12-20mm |
| - |
Kia |
M6 x 1.0 x 25mm |
| Slotted Pan Head |
Lexus |
M6 x 1.0 x 25mm |
| - |
Mazda |
M6 x 1.0 x 25mm |
| - |
Mercedes Benz |
M6 x 1.0 x 8-16mm
M5 x 0.8 x 8-16mm |
| Slotted Hex Washer Head |
Nissan and Infiniti |
M6 x 16mm |
| - |
Porsche |
M6 x 1.0 x 8-16mm |
| Slotted Pan Head |
Toyota |
M6 x 1.0 x 25mm |
Acura License Plate Screw Size
The most common license plate screw sizes for Acura license plates are M6 x 1 x 16mm and M6 x 1 x 20mm.
Audi License Plate Screw Size
The most common license plate screw size for Audi license plates is M6 x 1.0 x 8mm - 16mm.
BMW License Plate Screw Size
The standard BMW license plate screw sizes are M4.8 x 16mm and M5 x 0.8 x 8 - 16mm.
Cadillac License Plate Screw Size
Cadillac's standard license plate screw size is M6 x 1.0 x 16mm.
Chevrolet License Plate Screw Size
The standard Chevrolet license plate screw size is #14 x 3/4″.
Chrysler License Plate Screw Size
Most Chrysler vehicles' standard license plate screw size is ¼" - 14 x ¾".
Ford License Plate Screw Size
The standard license plate screw size for Ford vehicles is 1/4″ x 3/4″.
Ford F-150 License Plate Screw Size
The standard license plate screw size for Ford F-150 trucks is 14" - 14 x ⅝".
GM License Plate Screw Size
The standard license plate screw size for most GM vehicles is 1/4″ - 14 x 3/4″.
Honda License Plate Screw Size
Most Honda vehicles' standard license plate screw size is either M6 x 1.0 x 20mm or ¼" - 14 x 3/4″.
Hyundai License Plate Screw Size
Hyundai vehicles' standard license plate screw sizes are M6 x 1.0 x 16 - 25mm.
Jeep License Plate Screw Size
The standard license plate screw size for Jeep is 1/4" - 14 x 3/4 "″.
Kia License Plate Screw Size
The standard license plate screw size for Kia is M6 x 1.0 x 16 - 25mm.
Lexus License Plate Screw Size
Lexus vehicles' standard license plate screw size is 6.3mm x 25mm.
Mazda License Plate Screw Size
Mazda's standard license plate screw size is M6 14 - 20mm.
Mercedes Benz License Plate Screw Size
Mercedes Benz's standard license plate screw size is 6mm x 12 mm.
Mitsubishi License Plate Screw Size
Most Mitsubishi's standard license plate screw size is M6 x 1.0 x 10mm.
Nissan License Plate Screw Size
The standard Nissan license plate screw size is ¼" - 14 x ¾".
Pontiac License Plate Screw Size
Pontiacs' standard license plate screw size is M6 x 1.0 x 16mm.
Porsche License Plate Screw Size
The standard Porsche license plate screw size is ¼" - 14 x ¾".
Ram Truck License Plate Screw Size
The standard license plate size for a Ram Truck is ¼" - 14 x ¾".
Subaru License Plate Screw Size
The standard license plate size for Subaru is 1/4″ x 3/4″.
Suzuki License Plate Screw Size
The standard license plate size for Suzuki is #14 1/4″ x 3/4″.
Tesla License Plate Screw Size
The standard license plate size for Tesla is M5 x 0.8 X 8mm.
Toyota License Plate Screw Size
The standard license plate screw size for Toyota is M6 x 1.0 x 25mm.
Volkswagen License Plate Screw Size
Most Volkswagen's standard license plate screw size is M6 x 1.0 x 16mm.
Volvo License Plate Screw Size
The standard license plate screw size for Volvo is M6 x 1.0 x 16mm.
Anti Theft License Plate Screws
Anti Theft License Plate Screws use special tamper-proof security pin-compatible tools to secure the screws and keep
thieves from stealing your plates and frames.
What does M6 mean?
M6 refers to a metric 6 mm screw.
Where To Buy License Plate Screws?
License plate screws are available online at websites such as Amazon or eBay and your local auto parts store.
Conclusion
The article above helped you find what size license plate screws of your particular vehicle are.
It is important to install the correct license plate screws for your particular manufacturer, especially if there are
metal threaded holes as opposed to the plastic or nylon holders, which are more forgiving.
License plate screws are readily available either online or at your local auto parts store.